Go to http://www.mrlocksmith.com to learn more.
We have so many break-ins in Vancouver and the Lower Mainland we call this the “Vancouver Special.” The Mr. Locksmith “Vancouver Special” is a Schlage heavy-duty, commercial-grade deadbolt or High-Security Abloy of Schlage Primus Deadbolt. It could be the high-security, pick-resistant lock or the 600 series Schlage. Absolutely love this. My dad was installing similar locks to this 50+ years ago and this install is still very effective against Forced Entry Brute Force attacks and kick-ins. The door reinforcer that goes the front, the edge, and the back of the door makes it hard to kick in and the door twice as strong against Forced Entry. The 18″ Strike plate with the 3-inch screws installed into the stud makes the door harder to kick in. This is a good and solid.
This is a typical aluminum or steel metal door with wood frame. We are going to put a Vancouver Special on here. We are going to change the Weiser deadbolt or any deadbolt, to a heavy-duty Schlage. We’re going to put a door reinforcer on the door to make the door harder to kick and we’re going to put a security plate on the edge of the door.
If you just look at the front of the door here and this is a typical install we see in everywhere, in most condos nowadays you have only one door. We have a residential-grade deadbolt that you can buy at any Home Depot store and just a lever handle or knob set
Again, this is the typical light-duty deadbolt. We have the metal frame with wood down the center and the thumb turn on the inside. A lot of times on these doors when they kick the door in the bolt will just break off or this whole door here will just split open. Sometimes as well on the strike this whole door will be kicked open so this one’s at least okay. It has 3-inch screws in there so that’s good, but if you look at the hole they haven’t even drilled it in 1 inch so this door has never locked properly. It’s a poor install from before so we’ll put on a strike plate on here.
This is the door reinforcer or a mag plate and Donjo makes them too. It makes the door harder to kick in so when you saw the metal edges of the wood this will fit on the door and it will make it harder to, for the door to split when somebody tries to kick it in. This also offers some protection against ice pick attack. The door reinforcer doubles the strength of the door so it just makes it harder to kick in and for these doors to spread open.
Install the door reinforcer and install 3-inch screws we’ll catch the stud in the door frame. This makes the door harder to kick in so we’ll install this on here, put in the 3-inch screws, 3 inch screws all the way down and it will make the doorway harder to kick in.
You can see in the video how the door reinforcer goes right around the edge of the door, the back of the door. We have the good, Schlage 600 series deadbolt in there. It’s a commercial grade. Same locks used in hospitals, schools and Universities and it doesn’t look like a monster lock. It fits in well. Some people like the full plate down here. We never install the deadbolts below the handle, hate it. Deadbolts always go here or higher. This was just, we took out the old Weiser deadbolt, or light-duty deadbolt, we put in a heavy-duty deadbolt. And this will make the door harder to kick in and again some, some people sometimes ill put the full plate. This customer just wanted that plate and again the door is way harder to kick in-
The new Schlage Everest lock system has 6 pins. It’s got the side pin, really hard to pick, hard to bump and difficult to pick. Actually, we don’t have a good time picking these.
There is the plate. You have the 3-inch screw and screw all the way into the stud. It’s a well-built house so it’s got the good frame and now that will make the doorway harder to kick in
We have so many break-ins in Vancouver and the Lower Mainland we call this the “Vancouver Special.” The Mr. Locksmith “Vancouver Special” is a Schlage heavy-duty, commercial-grade deadbolt or High-Security Abloy of Schlage Primus Deadbolt. It could be the high-security, pick-resistant lock or the 600 series Schlage. Absolutely love this. My dad was installing similar locks to this 50+ years ago and this install is still very effective against Forced Entry Brute Force attacks and kick-ins. The door reinforcer that goes the front, the edge, and the back of the door makes it hard to kick in and the door twice as strong against Forced Entry. The 18″ Strike plate with the 3-inch screws installed into the stud makes the door harder to kick in. This is a good and solid.
The Schlage C123 or S123 key and cylinder is a 6 pin Schlage and very hard to pick open but not impossible. It is not rated as pick-resistant. The one up, Schlage Primus lock is UL rated as pick resistant, drill resistant, but this a perfect Vancouver Special install. A higher quality lock would be the Abloy Protec 2 Deadbolt.
Mr. Locksmith Deadbolt Installation with Door reinforcer and strike plate to help prevent Break-ins and robberies. The Schlage HD Deadbolts are an excellent lock for residential and commercial lock installations. The 24-hour mobile locksmith service can also change and rekey your locks to match our deadbolts. All Mr. Locksmith Vancouver Special deadbolts come with 5 Free Keys. Vancouver emergency lockout services, 24-hour lock repair, re-key, change, 24-hour mobile locksmith services in Vancouver, Downtown Vancouver, Burnaby, North Vancouver and West Vancouver. BC Licensed Locksmith B4227, bonded & insured locksmith.
Call Mr. Locksmith for further information http://www.mrlocksmith.com/
or email: [email protected]
Mr. Locksmith Squamish
Squamish Locksmith Main: (604) 669-8008
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/